Hard Wax Oil Rustic Oak Fiddes

Description

Fiddes Tinted Hard Wax Oil is a blend of natural oils and waxes offering exceptional durability and resistance for internal timber surfaces including floors, bench tops, furniture and areas subjected to a high degree of wear.

Produces a quick drying water repellent, tread-fast finish that will not peel or flake. Hard wax oil is easy to maintain and as a natural replenishable product it is easy to rejuvenate timber without sanding when required. Drying time under ideal conditions approximately 4 – 6 hours.

Coverage approx. 20-24 sqm per litre.

• Suitable for application onto children’s toys
• Food Safe
• Resistant to liquids
• Resistant to wear
• Slip Resistance R11 (Note R12 available)

Fiddes Tinted Hard Wax Oil is available in pre-tinted colors. Depth of colour can be varied through different application methods. All colours can be mixed together or mixed with the clear Hard Wax Oil to dilute the strength of the tint. This offers a unique opportunity to create your own colour and removes the need to stain. For colour matching or mixing, contact Fiddes for support.

Fiddes Tinted Hard Wax Oil is a blend of natural oils and waxes offering exceptional durability and resistance for internal timber surfaces and flooring. Hard Wax Oil is easily maintained and rejuvenated when required. If maintained correctly, no future sanding is needed as it is a replenishable coating system designed to be easily spot repaired without leaving repair marks. The coating is quick drying, meaning any future maintenance coats can be applied and dry within a few hours. The coating will be fully cured in 7 days. Ongoing maintenance will depend on the treatment, so to extend the life of your coating it is important to care for it correctly.

Colours: American, Antique, Dark Oak, Old English, Oak Lightening, Rustic Oak (Formerly Medium Oak), Onyx, Walnut, Whiskey, White, Timeless and Shale

Sizes: 250ml, 1lt, 2.5lt. 20L drums are available for special order; please contact us if required.

Preparation

Ensure all surfaces are clean, dry and free from previous finish. Minor gaps and holes can be filled with Fiddes Filler Gel if required. Sand the substrate with a fine 120-150 grade sandpaper. Ensure the surface is clean and remove all traces of dust prior to application.

Application

Ensure all areas to be coated are extremely well ventilated during and after application and always test on a small area prior to use. No sealer or primer is required. Stir contents thoroughly before and during use. Maximum 2 coats recommended. Clean applicators with White Spirits.

Floors

Apply with a brush, trowel or a floor applicator and buff in with a TAN or BEIGE floor pad using a slow speed buffing machine (175 RPM) whilst ragging edges working the product across the floor. Once dry, apply a coat of clear Hard Wax Oil using a short nap microfibre roller. Alternatively, to achieve a similar look without using a buffing machine mix 10% Tinted HWO with clear HWO and roll on using a short nap microfibre roller.

You can also roll the Tinted HWO straight using a short nap microfibre roller being extremely careful not to overlap and to leave roller stop marks.

Furniture

Brush or roll the Tinted Hard Wax Oil and then using a rag, buff into the surface ensuring the entire surface has been covered. Once dry, apply a coat of clear Hard Wax Oil using a short nap microfibre roller. Alternatively, see above instructions to mix Tinted with Clear Hard Wax Oil.

Additional notes

*When applied using the above methods the Tinted Hard Wax Oil is more of a transparent tint. If the project requires a deeper colour Fiddes recommend using a direct stain such as Fiddes Nitro or Light Fast Water Stain before applying a Clear Hard Wax Oil as per instructions.

*Depending on the timber substrate, to achieve a close to raw freshly sanded look, Fiddes recommend a coat of White Tinted Hard Wax Oil buffed in, followed by a coat of Clear Hard Wax Oil.

*Always do a test patch first and ensure the substrate is prepared in the same process as the project will be completed.

*Please refer to the Hard Wax Oil Application Sheet for additional application information.