Makita DTD172RTJ - 18V COMPACT BRUSHLESS 4-Stage Impact Driver Kit - Includes 2 x 5.0Ah Batteries, Rapid Charger & Makpac Case
Makita DTD172RTJ 18V 5.0Ah Li-ion Cordless Brushless 4-Stage Impact Driver Combo Kit
1 x Makita DTD172Z 18V Li-ion Cordless Brushless 4-Stage Impact Driver - Skin Only
Makita has a tradition of innovation in the cordless impact driver category, and the 18V LXT Brushless 4-Speed Impact Driver (DTD172) sets new standards. The DTD172 offers users four speeds, as well as Makita’s exclusive application modes for increased fastening control. The unique application models use the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening. Another precision setting is Tightening Mode (T-mode), which downshifts and reduces rotation and impact speed prior to driving the screw into place, and is engineered to minimize screw thread stripping, screw breakage and damage to work. The DTD172 delivers industry-leading performance in a compact and ergonomic design.
Added features include the one-touch 4-speed power selector button under the chuck, which enables one-handed speed changes, and reverse rotation auto-stop mode which stops rotation and impact when the fastener is loosened adequately to help prevent overloosening and dropped fasteners.
Features:
- Slim Tool Body with a re-designed head that is slimmer than the previous model enabling the tool to have greater access to tight corners or confided spaces
- One Touch Bit Installation has been designed to prevent the bit from unexpectedly falling off. A more effective mechanism has been designed increasing the strength of the chuck with out increasing the resistance required to install a bit
- Enhanced Anvil Holder; material change from needle bearing to ball bearing provides reduction of bit wobbling. Providing more stability and control when fastening
- Quick Change Selector; one touch mode selector located above the trigger allows the user to jump between modes single handed. Quickly changing between modes improves efficiency as you no longer have to take your hand off the tool
- Light Mode enables the tool to be used as a torch in dark environments. To turn the light on set the F/R change lever to the neutral position and pull the switch trigger. To turn off the light pull the trigger again
- 4 Optimised Application Modes; T-mode 1 and 2 for self drilling screws in both thick and thin sheet metal. Wood mode for fastening long wood screws. Bolt mode with rotation auto stop for tightening / loosening bolts
- 4-Speed Power Selection allow the user to adjust the power, speed and impact rate to suit the fastening application
Specifications:
- Voltage: 18V
- Drive shank: 6.35mm (1/4") Hex
- Max tightening torque:
- Max: 180Nm
- Hard: 170Nm
- Med: 50Nm
- Soft: 20Nm
- No load speed:
- Max: 0 - 3600rpm
- Hard: 0 - 3200rpm
- Med: 0 - 2100rpm
- Soft: 0 - 1100rpm
- Impact rate:
- Max: 0 - 3800ipm
- Hard: 0 - 3600ipm
- Med: 0 - 2600ipm
- Soft: 0 - 1100ipm
- Max capacity:
- Standard bolt: M5 - M16
- High tensile bolt: M5 - M14
- Length: 114mm
- Weight: 0.9kg
Warranty:
- 3 Years Warranty Covered By Makita Australia
2 x Makita BL1850B-L 18V 5.0Ah Li-ion Cordless Battery with Gauge
The Makita 18V LXT Li-ion 5.0Ah battery, BL1850B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.
The Makita 5.0Ah battery combines more run time (66% more run time per charge than the Makita BL1830 3.0Ah battery) with a category-leading charge time of only 45 minutes, so it spends more time working and less time sitting on the charger. For added convenience, it also features an L.E.D. charge level indicator to monitor battery charge. The BL1850B-L resists self-discharge so it is ready for use even after long periods of little to no useage.
Features:
- Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
- Up to 66% more run time per charge compared to BL1830
- Fast 45 minute charging time
- Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
- Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
- Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
- Battery resists self-discharge and remains ready for use even after long periods of storage
- Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
- Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
- The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
- If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating
Specifications:
- Voltage: 18V
- Amp hour: 5.0Ah
- Cell type: Lithium-Ion
- Charging time: 45 minutes
- Weight: 0.6kg
Warranty:
- 2 Years Warranty covered by Makita Australia
Makita DC18RC 18V Li-Ion Cordless Battery Fast Charger - DC18RC
Features:
- Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
- Forced air cooling fan - cools the battery to minimise charging time
- Digital power display identifies the condition of the battery and charging condition
Specifications:
- Voltage: 18V
- Cell capacity: 1.5Ah - 6.0Ah
- Charge Time:
- 1.5Ah: 15mins
- 3.0Ah: 22mins
- 4.0Ah: 36mins
- 5.0Ah: 45mins
- 6.0Ah: 55mins
- Length: 185mm
- Weight: 0.82kg
Warranty:
- 2 Years Warranty Covered By Makita Australia
1 x Makita 197051-3 (821550-0) Makpac Connector Carry Case System - Type 2
The Makita MAKPAC connector case system designed for the professional. Strong and collapsible carry handles make the connector cases easy to move and store. Rounded grips make it easy to remove the individual cases. The MAKPAC connector case system consists of four cases varying in height. The cases can be stacked on top of each other and locked together with the locking latches. The interconnected cases take up less storage space and are easy to transport to and from the work site.
Features:
- Stackable for storage and easy transportation
- Strong and collapsible handles
Specifications:
- Type: 2
- Dimensions (L x W x H): 395mm x 295mm x 157mm
- Weight: 1.6kg